top of page
For Models Equipped with Camber Plate & Pillow ball Upper mounts
Mcphersion upper mount instruction:
On the top of your strut tower you will find 4 allen head bolts to adjust camber on the camber plate.
Camber can be adjusted positive and negative.
NOTE: Before adjusting camber ensure that camber plate orientation is parallel and correct.
Allen Head bolts should be torqued to 12 lbs/ft
M8/M10 bolts should be torqued to 17/34 lbs/ft
Tighten all bolts to ensure they are tight and have not loosened during shipping.
bottom of page